Short answer kickass jump starter:
Kickass Jump Starter is a compact and powerful device that can jump-start your vehicle up to 20 times on a single charge. It also doubles as a power bank with USB ports for charging your devices. Kickass Jump Starter comes in different sizes ranging from pocket-sized options to heavy-duty models suitable for trucks and boats.
How to Use a Kickass Jump Starter and Get Back on the Road in No Time
There’s nothing quite as frustrating as finding yourself stranded on the side of the road with a dead car battery. The good news is that there’s an easy solution – kickass jump starters are a must-have for any driver who wants to be prepared for unexpected emergencies.
Here, we’ll walk you through how to use one of these powerful devices and get back on the road in no time at all.
Step 1: Read the instructions
Before attempting to use your jump starter, it’s essential to read through its user manual thoroughly. Make sure that you understand exactly how it works and what steps need to be taken before starting your vehicle.
Step 2: Choose the right location
When you’re ready to use your jump starter, make sure that both vehicles involved are parked in a safe location away from traffic or other hazards. Turn off all electrical accessories like air conditioning, radio and lights which can add loads onto batteries when they try to start resulting in being not able run by power reserves available via jumper cables.
It’s important also that two vehicles should not touch each other directly during jumping if possible because short circuiting may occur in rare cases leading more damage than help.
Step 3: Connect Jump Starter & Reverse-Clamp Protection Cables
Attach first red positive cable clamps from both ends of black box marked “+” signing next battery terminal (in most standard executive cars situated under bonnet), then repeat this process removing caps/plastic covers (-).
Next attach black clamp connected negative connector but make sure placing them carefully avoiding direct contact between metal surface applying extra care working around sharp edges similar sometimes found near engines/
However some cars require different approach usually coming with asymmetric sockets black plastic ones rather common fitting mechanic will have specific knowledge better assesment here..
Finally turn BMW device ON allowing electric impulses pass through creating flow energies as motors finished charging up increasing voltage output even further maximising chances success
If something goes wrong while attempting to jump-start your vehicle, immediately remove all clamps and stop the engine. Give it some time for recharging to avoid wasting power in battery works an additional few attempts.
Step 4: Start your vehicle
Once you’ve connected everything, turn on the ignition of the car that needs a boost. Wait until dashboard light illuminates brighter than usual indicating potential success achieved then have yourself check what happened under hood (without touching any part motor or electrical components.
Try starting vehicles right away if successful! If not then repeat step three one more time with slightly longer break between BMW kickstarter charging up phase and actual driving attempt.
Some drivers prefer letting other cars run for several minutes prior jumping beginning rest awaiting arrival before trying again.
Step 5: Disconnecting cables
After getting your vehicle moving again, carefuly disconnect both sets of clamp connectors Black cable ought being first removed following red wire (-) leading into main booster unit metallic case untill all contacts are safely withdrawn..
See process carefully repeating connector release steps removing it unchallenged.
Never try pulling leads
Jump Start Like a Pro: A Step-by-Step Tutorial on Using Your Kickass Jump Starter
Picture this: You’re on a road trip in the middle of nowhere, enjoying your favorite tunes when suddenly everything goes silent. You try turning the key, but nothing happens. Your car battery is dead as a doornail and all you have left is your trusty kickass jump starter.
Don’t panic! In this step-by-step tutorial, we’ll show you how to use your jump starter like a pro and get back on the road in no time!
Step 1: Safety First
Before anything else, make sure that you’re parked in a safe place away from traffic with the handbrake engaged. Also, make sure to turn off any electronic devices like radios or headlights that might drain power from your car battery while attempting to jump-start it with your kickass device.
Step 2: Preparation Is Key
Now it’s time to prep your equipment for action! Take out the cables included in your kit and connect them carefully according to color coding – red cable connects positive (+) terminal on both batteries while black ones connect negative (-) end of good battery’s terminals as well as dead one’s ground point (preferably metal area).
Remember not to touch clamps once connected until after “recharging” process has completed successfully! Do note that failure or improper connection via sparks can occur if these warnings are ignored.
Tip: It may be helpful here if someone knowledgeable id present – such as AAA driver or nearby mechanic shop…just so they can double-check each step before starting up vehicle(s)
Step 3: Now We’re Jump Starting…
You’ll now need push “On” switch found next charging port location usually located somewhere near powering button/switch…Listen closely for beep sound made during initiation phase which confirms product connectivity at work.
Assuming successful start-up noise occurred take clue light indicator showing progress-120% means fully charged whereas 0% equals empty rechargeable power supply unit able supply enough voltage to kick start any 12V/24V gel, lead-acid or AGM batteries (which is most common type of vehicle battery).
Step 4: The Big Moment – starting your car!
With both “dead” and source “live”vehicle engines off connect clamp on red side to dead one’s positive end.
Next attach negative grounding cable moves from this terminal across auto body until reaching the unlisted metal area.
Once clamps secured perform turn over mission involving engine firing up by turning key while holding it in position for at least several seconds – Electric motors should now whistle back into action which represents big accomplishment that will ultimately enabled you to get rolling again…One more note before taking off-Do take time remove cables properly paying careful attention not crossing them so causing charges forming fire risks along electric fields. Store kit carefully thereafter out sight reach children etc.
By following these simple steps and using your kickass jump starter like a pro, you’ll never be stranded with a dead battery again. So go ahead and hit the road with confidence knowing
Kickass Jump Starter FAQs: Answers to All Your Burning Questions
Are you tired of getting stranded on the side of the road with a dead battery? Don’t worry, we’ve got you covered. Kickass Jump Starters are here to save the day and get you back on the road in no time.
But before you invest in one of these powerful devices, it’s important to have all your questions answered. Here are some frequently asked questions about our kickass jump starters:
1. What is a kickass jump starter?
A kickass jump starter is a portable device designed to jumpstart vehicles when their batteries die. It’s equipped with a rechargeable lithium-ion battery that provides power to start your car without needing another vehicle or jumper cables.
2. How does it work?
A kickass jump starter works by delivering high-amperage electric current to your car’s dead battery via its built-in clamps. This provides enough power for your engine to crank and start running again.
3. What types of vehicles can I use it on?
Kickass jump starters come in different models with varying starting capabilities suitable for various applications such as cars, trucks, SUVs, boats, motorcycles and even lawn mowers!
4. Can I use it more than once before recharging?
Yes! In fact, most Kick-ass Jumpstarter models can be used multiple times (depending on capacity) on any given charge depending upon how depleted they were beforehand; but please check user manual for specific instructions.
5. How long does it take to fully charge my Kick-Ass Jump Starter?
The charging time varies between each model due maximum capacities vary from 6 hours up-to 36 hours so make sure you read instruction booklet completely
6.What additional features do they offer other than boosting flat batteries?
Our latest KSJ series helps not only provide instant emergency starting functionality but also offers added convenience such as an LCD display screen displaying voltage levels along with useful inputs/outputs e.g USB ports great charging options not just for for phones but basically any device with a USB port!.
7. What should I do if my car still won’t start after using the kickass jump starter?
If your car doesn’t spark to life once you’ve attempted and utilised the Kick-ass Jump Starter, it’d suggest that there may be an issue beyond what can be resolved by the use of this device alone. In such cases we recommend consulting a qualified mechanic.
8.What’s in the box?
Depends on model which you go for! We offer basic models without added accessories whereas some options include extras like carry cases, various adapters and connectors – check each listing for further details!
In conclusion, Kickass Jump Starters are a trusty companion essential when travelling or anytime vehicle problems arise. Before investing know which kind is best suited to your needs so make sure to consider size/capacity as well as additional features before making your purchase! Keep safe out there everyone!