Short answer: Autowit Supercap 2 portable car jump starter
The Autowit Supercap 2 is a high-capacity and ultra-safe portable car jump starter powered by supercapacitors. With the ability to start up to 10L gas or diesel engines within seconds, it offers convenience and peace of mind in emergency situations. Its lightweight design makes it easy to carry around, perfect for road trips, camping, or any outdoor adventure.
How to Use Autowit Supercap 2 Portable Car Jump Starter: A Comprehensive Guide
If you’re someone who is always on the go or frequently taking long drives, then you know how frustrating it can be when your car battery dies unexpectedly. While traditional jumper cables are effective in jumpstarting a dead battery, they require another vehicle to be present and available for use.
Luckily, with advancements in technology, we now have portable car jump starters like the Autowit Supercap 2 that make starting a dead vehicle much easier and convenient. In this comprehensive guide, we’ll walk through step-by-step on how to use the Autowit Supercap 2 Portable Car Jump Starter.
The first thing to note about the Autowit Supercap 2 is its unique supercapacitor technology. Unlike other conventional lithium-ion battery-powered jump starters, which typically have a charging time of several hours before being ready for use; The Autowit SuperCap 2 uses ultracapacitors instead of batteries so that it gets charged more quickly (under five minutes) than regular portable power banks while delivering more power! With up to **1000 peak current**, this device easily jumps start engines with displacements of up to **7L**.
Before using your Autowit Supercap 2 Portable Car Jump Starter for the first time:
1- Ensure your unit has been fully charged by plugging it into an outlet via its USB Type-C input port until four green LEDs light up indicating full charge.
2 – Confirm all safety measures i.e remove any links/watches from yourself
3 – Relay Information from manufacturer’s Manual
Steps To Follow When Using The Autowit Supercap 2 Portable Car Jump Starter
Step #1: Place The Device On A Flat Surface
Ensure that once you take out your AutoWIT® SUPERCAP 2™ Jumpstarter From his casing/bag You place it on a flat surface-this helps avoid any accidental falling off during jumping your car.
Step #2: Turn Off All Electrical Components Of Your Vehicle.
Before attempting to jump-start your car with the Autowit Supercap 2, ensure all electrical components are switched off and disconnected as this helps reduce power consumption and any risk of damage due to a sudden surge in electricity flow to other electronics in-car.
Step #3: Connect The Jumper Cables To Your Car’s Battery
Connect The Red Clamp(+signal) directly onto the positive terminal on your battery diagram on top of the clamp while connecting Black clamp(-Ground Cable) onto negative terminals (-signal-black) which can be connected to body-metallic parts- just make sure no part is obstructing.
Step #4: Start Arranging Cables On Autowit Supercap 2 Device
once both clamps are securely connected place them out of the way next step position autowit supercap device where it is easily accessible, making use of attached handle secure it from being cluttered or scattered when jumping starts i.e keep at an arm’s length away from engines heated
Step-by-Step Tutorial on Using Autowit Supercap 2 Portable Car Jump Starter: Your Ultimate Rescue Plan
Imagine this scenario: it’s a crisp winter morning, and you’re rushing to get to work. You hustle out of your house, hop in the car, turn the key…and nothing happens. Your heart sinks as you realize that your battery is dead.
As stressful as this situation can be, there is no need for panic if you have an Autowit Supercap 2 Portable Car Jump Starter! This device is designed to jump-start any vehicle with a gasoline engine up to 7.0L or diesel engine up to 4.5L (which should cover most passenger cars and some SUVs).
Here’s how you can use one:
Step One: Charge It Up
Before venturing out on the road with this life-saving tool in hand, it’s essential always to make sure that your Autowit Supercap 2 is fully charged up and ready for duty.
To charge it just plug its charging cable into a USB port – which could be found anywhere from inside your car or from power banks – typically takes about two hours for recharging once drained completely.
Step Two : Attach The Positive And Negative Cables
Once your Autowit Supercap 2 has sufficient juice stored up inside of its high-power capacitors, follow these steps next:
Find help (’cause we don’t want anyone doing anything dangerous here):
1- Ensure that both vehicles’ engines are turned off before connecting cables;
2- Identify positive (+) & negative (-) terminals clearly labeled onto both batteries;
3- Countlessly WARN YOUR HELPER TO NOT TOUCH ANY OF THE CONNECTIONS INTO CONTACT WITH OTHERS OR SHORTING WHILE CONNECTED!!!
jokes aside:
4- Connect red clip/cable correspondingly (+) positive terminal by clamping tightly there first;
5- Then clamp black clip/ cable correspondingly on (-) negative side;
6-Reconnect Red Clip/Cable To Electricity Source (but disconnected from the dead vehicles)
7-Crank It Up!
After connecting both power sources through Autowit Supercap 2;
8- Turn on vehicle engine and remove cables/clips in a reverse pattern of when connected [ Not doing so properly could short out battery, create sparks, or worse cause an explosion. Vanquish this factor to avoid any possible injury/or damage!]
Remember:
NEVER ALLOW THE RED AND BLACK CABLES TO TOUCH AGAINST EACH OTHER!!!
The LEDs will inform users that it’s time to detach both clips/cables correctly and before shutting/storing.
Step Three: Bask In Your Superiority
Congratulations! You’ve successfully jump-started your car without needing another driver’s help!.
You can now drive off into the beautiful sunrise with little stress or panic attack thanks to Autowit Supercap 2 Portable Car Jump Starter– your ultimate rescue plan.
Autowit Supercap 2 Portable Car Jump Starter FAQ: Answering the Most Pressing Queries about this Innovative Device.
If you are looking for a portable car jump starter that is innovative, reliable and easy to use, then Autowit Supercap 2 is the perfect product for you. It has been making waves in the market since its launch due to its impressive features and capabilities. However, before investing in this device, it’s natural to have some doubts or queries about it. In this post, we will be answering some of the most pressing queries about the Autowit Supercap 2 Portable Car Jump Starter.
1) Does size matter? How compact is Autowit Supercap 2?
Yes! Size does matter when choosing a portable car jump starter because you want something that can easily fit into your glove compartment or trunk without taking too much space. The good news is that Autowit Supercap 2 is one of the most compact options available on the market today. The whole package comes with dimensions of just 5 x 3 x 1 inches and weighs only around half a pound!
2) Is it powerful enough to start my car engine even if it’s dead several times over?
Autowit Supercap 2 packs a mighty punch despite being small in size thanks to its supercapacitor technology which makes use of ultra-capacitors built by Tesla supplier Maxwel co., LTD instead of traditional lithium-ion batteries used in other brands. This feature allows this device to deliver up to seven consecutive jumps per charge at peak performance level while starting any vehicle battery ranging from gas engines up to V8s through electric vehicles (EV).
3) How long does it take for Supercap- based product charging time compared with Lithium-ion battery products?
The charging time for Autowit Supercap 2 is considerably shorter than most conventional portable power banks/jump starters’ charging duration time frame as theorized above-supplying capability helps quicken charging, complete recharging only takes four hours, while just 10 minutes of charging could provide enough power for your car to start & drive away.
4) What about safety? Are there any built-in safeguards or protection features?
Autowit Supercap 2 has been designed with the user’s safety in mind by incorporating multiple safety features. These include reverse polarity protection, overload protection, short-circuit protection as well as over-current and over-voltage protections that make it safe and easy to use. This eliminates potential damage possibility such as overheating within a vehicle’s electrical system caused by incorrect wiring placement or too much voltage usage on ignition control modules/resultant electronic equipments.
5) Is it worth its price point compared to other portable jump starters available on the market?
Yes! Autowit Supercap 2 is worth every penny spent when you consider the numerous benefits and convenience it offers. It provides you peace of mind knowing that you have a reliable device tucked in your glove compartment ready to solve any emergency related needs instead of relying solely upon outside help from breakdown agencies/services (that will