Short answer viking 1700 peak amp portable jump starter and power pack:
Viking 1700 peak amp portable jump starter and power pack is a device that can be used to jump-start dead batteries in cars, trucks, boats, motorcycles, and other vehicles. It also serves as a portable power source for charging mobile devices and powering small electronics. The device is compact and easy to carry around making it ideal for emergencies and outdoor activities such as camping or boating.
A Step-by-Step Guide on How to Use the Viking 1700 Peak Amp Portable Jump Starter and Power Pack
Are you tired of being stranded on the side of the road with a dead car battery? Or maybe you want to be prepared for any power outages or emergencies at home. Look no further than the Viking 1700 Peak Amp Portable Jump Starter and Power Pack.
This innovative piece of technology is an absolute lifesaver, literally! It can jump-start your vehicle up to 20 times on a single charge, which means freedom from calling tow trucks or getting stuck in remote areas. It also has a built-in AC charging port that allows you to charge electronic devices like phones, tablets, laptops and more – all while being compact enough to fit comfortably in your glove box!
So now that we have sold you on this much-needed product, let’s guide you through how to use it step-by-step:
Step 1: Fully Charge Your Jump Starter
The first thing you need to do before using your new Viking 1700 Peak Amp Portable Jump Starter and Power Pack is charge it up fully. You can do this by either plugging it into an electrical outlet using its included charger cord or via DC adapter (not included).
Step 2: Locate Your Car Battery
It may seem obvious, but locating your car battery ahead of time will save time when trying to figure out how best to connect the jumper cables later.
Step 3: Positioning The Jump Start Cables
Next step is positioning the jump start cable properly so that they are easily accessible once connected. Make sure your vehicle’s engine is turned off beforehand as well! Place them within reach near both batteries; one end should be clamped onto positive terminal labeled (+) & other clamp (-) symbolized negative (-).
Step 4: Connecting And Activating Cable Clamps To The Dead Battery
Now we’re ready for action! First things first – make sure everything is unplugged before attaching anything together again though!
Connect the red (positive) clamp to the positive battery terminal (+) of your car, then attach red clamp other end crocodile clip onto the corresponding terminal labeled (+) near or at least nearby on Jump Starter unit.
Next step is to connect black (negative) clamp to negative (-) terminal at same spot as car’s battery position & and secure!
Step 5: Turn The Key
Turn over ignition and once engine starts let it run for few minutes. Remove auto jump starter wires/clamps from their respective places by starting with negative wire first carefully taking them off in reverse order without touching each other metal parts as safety issue may arise if done carelessly.
Congratulations! You’ve successfully used your Viking Portable Jump Starter and Power Pack to revive a dead vehicle or even saved yourself during power shortage crisis situations. Do not forget that keeping careful precautions throughout whole process while using this equipment is crucial making sure everything goes well expectantly – so follow these simple instructions where you go next time adversity strike unannounced !!!
Answering Your FAQs: Everything You Need to Know About the Viking 1700 Peak Amp Portable Jump Starter and Power Pack
Are you tired of getting stranded on the side of the road with a dead battery? Do you worry about losing power during an emergency or camping trip? The Viking 1700 Peak Amp Portable Jump Starter and Power Pack is here to save the day! In this blog, we will answer some frequently asked questions about this powerhouse device.
What is a jump starter and power pack?
A jump starter is a portable device that can be used to jump-start your car battery when it dies. A power pack, on the other hand, is a compact battery that provides portable power for various applications. The Viking 1700 combines these two functions into one handy unit – giving users ultimate flexibility in any situation.
How does it work?
The Viking 1700 uses advanced lithium-ion technology to provide reliable and long-lasting power. To use as a jump starter, simply attach the provided clamps to your dead battery (red clamp to positive and black clamp to negative) and start your engine. As a power pack, you can charge up multiple devices using its USB ports (including phones, laptops, tablets), run small appliances like fans or lights through its AC outlet or even inflate tires using its built-in air compressor.
How powerful is it?
This mighty device packs a punch with its impressive 1700 peak amps of starting current – enough juice to easily restart most cars, trucks/SUVs or boats’ batteries instantly without any problems- plus it has enough capacity at full charge level which allows another feature such for several hours operation time in powering small electrical devices!
Is it safe?
Absolutely! Passed rigorous safety tests under UL-listed standards & certified by ETL Safety Standards; which means not only implementing standard protection from overheating & overcharging while charging external electronics but also providing maximum internal safety systems against any unusual events that may happen due mechanical failure provided with LED visual warning if abnormalities noticed preventing user accidents
How long does it take to charge?
The Viking 1700 Jump Starter and Power Pack can be fully charged in approximately four to five hours using the included charger or a 12-volt in-car charging cable. Ensure you regularly charge every three months if not used frequently.
How long will it hold its charge?
The device holds its charge up to six months on standby mode, which is ample time for emergency situations that may arise outside home/office premises . This is facilitated through maintenance-free lithium-ion technology being low-self-discharge batteries making them super reliable for extended off-grid use.
In conclusion,
We hope this blog has been informative and helpful. The Viking 1700 Peak Amp Portable Jump Starter and Power Pack is a smart investment for anyone looking for peace of mind when it comes to emergency power needs – whether you’re out camping, travelling on small expeditions, towing your boat or just going about your day-to-day routine in case unexpected dead-battery issues arrive. Not only is it quick-acting and efficient but also safe & trustworthy with certification from regulatory boards ensuring reliance providing visually verifiable warning if
Maximizing Efficiency: Tips and Tricks on Using the Viking 1700 Peak Amp Portable Jump Starter and Power Pack.
As someone who frequently travels on road trips, I know firsthand the frustration of a dead car battery and no nearby help. That’s why a reliable portable jump starter like the Viking 1700 Peak Amp Portable Jump Starter and Power Pack is an essential tool for any driver.
Not only can it jump-start your vehicle in seconds, but it also doubles as a power pack to charge phones or other electronics while on-the-go. However, to truly maximize its efficiency, there are some tips and tricks that can be utilized:
1. Charge regularly: It goes without saying that before hitting the road, make sure your Viking 1700 is fully charged. But even during trips or extended use, periodically plugging in and charging can ensure optimal performance when you need it most.
2. Use proper safety measures: As with any powerful electrical device, take precautions such as wearing gloves/goggles and avoiding short circuits.
3. Store correctly: Keep the Viking 1700 away from extreme temperatures (whether hot or cold) since they can affect its battery life. And if not being used for long periods of time, recharge every few months to avoid draining completely.
4. Understand specs & settings: The Viking 1700 has multiple voltage options depending on what type of vehicle (12V/24V) you need to jump start which should be correctly matched up beforehand by reading specifications provided below the outline terminal instructions at both ends; this helps prevent damage/dangerous conditions due mismatching voltages!
5. Don’t overuse electronics feature simultaneously – while using it’s important not overload too many devices concurrently so taking turns charging one item after another switch between devices ensures efficient charging
In conclusion whatever you use it for – whether powering electronic gadgets via USB ports or jumping start vehicles quickly in emergency situations – maximizing its efficiency requires following basic guidelines highlighted above!